 |
 |
|||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
 |
 |
Home | Profile | Advantages | Products | Apply | Customer Service | News | Sales Network | Messages | Contact Us | 中文 |
 |
|
 |
 |
| ·Non-chimney, high effficency and speed, oil saving and environmental Unique design with no chimney, which fully utilizes the high temperature of the heating exhaust gas. The alloy in the tank will be heated from top, bottom, inside and outside which allows fast melting and is both oil saving and environmental. In room temperature, it takes 80 minutes to heat the 350Kg3# zinc alloy to 420°C ( a normal furnace takes 2 to 3 hours) ·It uses super quality thermal insulation materials After melting materials for two hours, the furnace shell connection temperature will be approximately 85°C (can be touched by hand) ·Original imported combustion machine(with blower): high efficiency and oil saving |
·Chimneyless, effective, fast, oil-saving and environmental Unique design with no requirement of chimney, with recycled utilization of the exhaust gas heat. The alloy inside and outside melting tank is heated from top to bottom that can melt 230 KG aluminum alloy in 2 hours. It take 4 to 5 hours to heat up to 660°C ·The use of advanced quality thermal isolation materials It has super temperature holding performance. The outside shell of the furnace is at the temperature of approximately 80°C (can e touched by hand) ·original imported combustion machine: highly efficient and oil saving A 1000°C thermal needle (thermoelectric couple) with of ф22× length 600 and a stable 1000°Cthermal meter are supplied. The thermal needle is supplied with a protective shield and a fixture frame. The thermal meter and the electric control are supplied special electric box and cables with sufficient length in order for customer to mount on nearby columns or walls. |
